A4-70 SUS316 M10 stainless steel hex flange nuts
The flange may be serrated to provide a locking action. On a serrated flange nut, the serrations are angled such that they keep the nut from rotating in the direction that would loosen the nut. Because of the serrations they cannot be used with a washer or on surfaces that must not be scratched. The serrations help in preventing the vibration of the nut from moving the fastener, thus maintaining the holding power of the nut.
| Standard: DIN6923.IFI145 |
| Size: 1/4”-3”, M5-M64 |
| Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass |
| Grade: SAE J995 Gr.2,5,8; CL4, 5, 6, 8, 10, 12 |
| Thread: M, UNC, UNF,BSW |
| Finish: Plain, Zinc Plated(Clear/Blue/Yellow/Black), Black oxide, Nickel, Chrome, H.D.G. |
| Nut Sizes | Width Across Flats | Thickness |
| #6 | 0.312" | 0.171" |
| #8 | 0.344" | 0.203" |
| #10 | 0.375" | 0.219" |
| 1/4" | 0.438" | 0.236" |
| 5/16" | 0.500" | 0.283" |
| 3/8" | 0.562" | 0.347" |
| 7/16" | 0.678" REF | 0.386" REF |
| 1/2" | 0.750" | 0.458" |
| 5/8" | 0.931" REF | 0.555" REF |
| 3/4" | 1.091" REF | 0.657" REF |
Packaging Details: a. bulk in cartons (<=25kg )+ 36CTN/wood solid Pallet
b. bulk in cartons 9"x9"x5" (<=18kg )+ 48CTN/wood solid Pallet
Supply Ability:1000 tons per month
MinimumOrder:200kgs for each specification
Trade Term:FOB/CIF/CFR/CNF/EXW/DDU/DDP
Payment :T/T, L/C , D/A , D/P , Western Union,etc
Market:South&north Amrica/Europe/ etc.
FAQs
- How does a flange nut work?
- The integrated washer of a flange nut works in the same way as a standard washer, providing a greater area to distribute the nut's pressure over the part being secured. If the flange has serrations, these serrations bite into the material installed, making the nut less likely to loosen over time due to vibrations.
- How do you tighten a locking flange nut?
- Like any other hex nut, you can tighten a locking flange nut with a wrench or ratchet of the appropriate size after threading it onto the end of the bolt you're installing.
- How do you measure a flange nut?
- Flange nuts are measured based on their internal threading, displayed as Diameter - Thread Pitch. To find a matching bolt for the nut, or vice versa, this thread size needs to match. For example, a 1/4"-20 flange nut can only be fastened onto a 1/4"-20 bolt or thread.
- What is a hex flange nut?
- Hex Flange Nuts are hex nuts with a wide flanged portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material. They can come in serrated or non-serrated styles.
- What does a flange nut look like?
- A flange nut looks like a standard hex nut but with a widened bottom resembling a washer that's integrated with the nut. This gives flange nuts a slight bell shape to them.
Product Tags:
|
|
M10 Stainless Steel Hex Flange Nuts A4-70 SUS316 Images
|
